**SMC真空表,SMC真空表產品介質
如果您對該產品感興趣的話,可以
產品名稱: **SMC真空表,SMC真空表產品介質
產品型號: ZSE30AF-01-N-M
產品展商: SMC
產品文檔: 無相關文檔
簡單介紹
**SMC真空表,SMC真空表產品介質
7 and 9 N·m, R : 12 and 14 N·m respectively.
Note 2) When using other fluids, please consult with
SMC for fluid compatibility information concerning corrosive
potential.
Note 3) Movable parts (gear and etc.) in the pressure gauge are made of brass.
Note 4) X3 (wetted parts stainless steel) specifications are not available.
**SMC真空表,SMC真空表產品介質
**SMC真空表,SMC真空表產品介質
的詳細介紹
**SMC真空表,SMC真空表產品介質
Make sure that no direct impact or vibrations are
applied to the body.
2. If operating under pressure pulsations or in high
frequency operations, please contact SMC.
) When mounting a pressure gauge, use caution not to
tighten excessively. Excessive tightening will
cause product failure. Use a pipe tape for sealing
9、按連接方式分類
閥的連接方式有管式連接、板式連接、法蘭連接和集裝式連接。
10、按流通能力分類
按流通能力的分類有兩種：一是按連接口徑分類，另一種是按有效截面積分類。
連接口徑有用閥的公稱通徑表示的，有用連接口徑的連接螺紋表示的。
按控制數(shù)可分成單控式和雙控式。單控式是指閥的一個工作位置由控制信號
（控制信號可以是電信號、氣信號、人力信號或機械信號等），
另一工作位置是當控制信號消失后，靠其它力來獲得（稱為復位方式）。.
Remove the small screw (1 position) from the pressure gauge.
2. Place the cover ring on the pressure gauge.
3. Using the small screw that is provided with the cover ring, install the cover
ring. The installation torque is 0.3 to 0.5 N·m.
Recommended tightening torque: R : Set between
**SMC真空表,SMC真空表產品介質
